Contact Us
Fax:+86-571-88220227
Mail:[email protected]
Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China
How to maintain the reducer
Grease selection When selecting the grease according to the bearing load of the walking reducer, the grease with a small penetration degree should be selected for heavy loads. When working under high pressure, in addition to low penetration, it also has higher oil film strength and extreme pressure performance. When selecting grease based on environmental conditions, calcium-based grease is not easily soluble in water and is suitable for dry and low-water environments. When selecting grease according to working temperature, the main indicators should be dropping point, oxidation stability and low-temperature performance. The dropping point can generally be used to evaluate high-temperature performance. The actual working temperature of the bearing should be 10-20℃ lower than the dropping point. The use temperature of synthetic grease should be 20-30℃ lower than the dropping point.
Related Industry Knowledge
- Analysis of sprocket manufacturers:...
- The bearing capacity of the gear ma...
- Working principle of speed changer
- The difference between inverter and...
- Use and maintenance of cycloid reducer
- Helical gear reducer relative to th...
- Some failures of the reducer during...
- Speed control method of geared motor
- How to install and arrange the gear...
- Definition of geared motor
- What are the classifications of the...
- Features of reducer
- Four precautions for structural des...
- Rotary vane vacuum pump
- Water ring vacuum pump
- The cost of dry pumps
- Liquid ring pumps can be divided in...
- Classification of vacuum pumps
- The main purpose of air compressor ...
- There are many types of air compres...