Contact Us
Fax:+86-571-88220227
Mail:[email protected]
Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China
- tightening of the chain (the chain is jammed into the front gear disc).
- noise generated when the driveline is running.
- the chain can be heard gurgling in the tunnel or through an object. (this means the chain is too dry)
Maintain at least once a month or every 250 km (150 miles) on normal roads; Driving on cross-country roads,
Clean and maintain at least every 100 kilometers (60 miles).
clean
- clean your chain after each ride, especially in rainy and humid conditions.
- be careful to use a dry cloth to wipe the chains and accessories.
- if necessary, use an old toothbrush to clean the gaps between the chains.
- also don't forget to clean the front and rear transmission guide wheels.
- remove dirt and dirt from the chains with a brush, assisted by warm soapy water if necessary.
- do not use strong acid or alkaline cleaners (such as rust removers), as these chemicals can damage or even break chains.
- do not use a chain washer with added solvent to clean the chain, which will definitely damage the chain.
- avoid the use of organic solvents such as stain remover, which will not only damage the environment but also wash the lubricating oil from the bearing area.
- clean your chain after each ride, especially in rainy and humid conditions.
- be careful to use a dry cloth to wipe the chains and accessories.
- if necessary, use an old toothbrush to clean the gaps between the chains.
- also don't forget to clean the front and rear transmission guide wheels.
- remove dirt and dirt from the chains with a brush, assisted by warm soapy water if necessary.
- do not use strong acid or alkaline cleaners (such as rust removers), as these chemicals can damage or even break chains.
- do not use a chain washer with added solvent to clean the chain, which will definitely damage the chain.
- avoid the use of organic solvents such as stain remover, which will not only damage the environment but also wash the lubricating oil from the bearing area.
Related News
- How To Judge The Quality Of Reducer...
- How To Lubricate The Reducer Gear
- Machine Tool Gear Structure
- Structure And Function Of Gears
- According To The Working Conditions...
- Drive Sprocket Installation Require...
- Maintenance Of Machining Equipment ...
- Main Causes And Solutions For Tooth...
- Influence Of Chain Deformation On C...
- Chain Drive And Shaft Drive Analysis
- What Should I Pay Attention To When...
- Chain Use And Maintenance Methods
- Happy Children's Day!
- Dragon Boat Festival holiday notice
- May Day International Labor Day
- our company
- Classification Of Slewing Bearings ...
- How To Solve The Slewing Bearing If...
- Principle Of Spiral Jack Principle
- Safe Operation Of The Screw Jack