Request a Brochure
and SamplesContact Us
Fax:+86-571-88220227
Mail:[email protected]
Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China
Worm Reduction
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements M1, M2, M3 Metric Worm Reduction Gearboxes Small precision with multi-shaft arrangements • 6:1 to 100:1 • Torque 1 to 10 Nm • Drilled and tapped mounting holes on top and bottom • Flush fitting...
Automobile Gears
The gearbox is the second stage in the transmission system, after the clutch . It is usually bolted to the rear of the engine , with the clutch between them. Modern cars with manual transmissions have four or five forward speeds and one reverse, as well as a neutral position....
Greenhouse Reducer
1, Used to open and close greenhouse curtaining system 2, Large Torque 3, Stable performance 4, Accurate limit control
Ratchets Wheel
A rachet involves a round gear or a linear rack with teeth, and a pivoting, spring-loaded finger called a pawl that engages the teeth. The teeth are uniform but asymmetrical, with each tooth having a moderate slope on one edge and a much steeper slope on the other edge. When...
Greenhouse Gearbox
This gearmotor integrates a gearbox, a electric motor, and limit switches. It is connected with a steel shaft to drive livestock equipments. With the support of electrical panel, it can run and then stop after set number of turns. Then it can drive the livestock equipment to...
Greenhouse Gear Motor
Reliable in operation and long life.Because the main parts are made of bearing steel through quenching treatment(HRC58-62), it got high strength. Meanwhile the transmission contact of part adapts rolling friction, so it is durable and long life.Because of reasonable in...
Shaft Clamp
Indefinitely adjustable and easy to remove, one-piece clamping collars are typically used on hard or soft standard round shafts, over a split hub or on thin wall tube. By using friction to provide superior grip on bars and shafts, single split collars offer sturdier, more...
Aluminum Gearbox
Our Aluminum series right angle worm gear reducers are designed with metric center distances and quill style motor input flanges which allow users a much greater supply of off-the-shelf standard motor input choices. Metric center distances allow for easy installation into...
Variable Gearbox
1) High speed regulating precision,up to 0.5-1 rotation 2) Large speed changing range:the speed ratio ranges from 1:4 to 1:7 freely 3) High in strength and long in service life 4) Convenient to regulate the speed
Variable Speed Gearbox
The unit is designed to provide low output speed at corresponding high output torque. The drive unit is manufactured from standard components and comprises of AC squirrel cage motor, variable speed drive and gearbox with case hardened profile ground helical gears. It can be...
Variator Gearbox
High quality aluminum alloy Motovario like gear box,light weight and non-rusting Large output torque,stable transmission with lower noise. High hear-radiating efficiency,elegant shape,durable service life and small size. Suitable for omni-bearing installation
Variable Speed Transmission
Good adaptation:UDL series speed variators can be combined with all kinds of speed reducers to achive low stepless speed regulating.