Contact Us

WhatsApp:+8613083988828

Fax:+86-571-88220651

Mail:sales@gear-sprocket.com

Add:Shenhua Road, Hangzhou, Zhejiang, China

No Heat Regenerative Adsorption Drying Machine

No Heat Regenerative Adsorption Drying Machine

According to the principle of voltage transformation adsorption, with special affinity for water vapor of adsorbent , adsorption of moisture in compressed air. This equipment is made into the twin towers structure, under the control of the program controller, two tower work alternately, a tower...

InquiryChat Now

  • Product Details

According to the principle of  voltage transformation adsorption, with special affinity for water vapor of adsorbent , adsorption of moisture in compressed air. This equipment is made into the twin towers structure, under the control of the program controller, two tower work alternately, a tower under the high pressure absorbing moisture, another tower under low pressure using the preparation of the dry air itself to complete the steam stripping process, continuous cycle to work.
                       Conditions of use:                        
                      1. Installation site: the ground is flat, without foundation, 80 cm distance from the wall.
                      2. Installed environment: well ventilated and has no dust, no oil pollution.
                      Working conditions:                        
                      1. The inlet pressure: standard 0.7 Mpa ≦ 1.2 Mpa
                      2. Regenerative way: no hot regeneration
  3. The inlet temperature: ≦ 40 ℃
  4. The inlet oil content: < 0.1 PPM
                      5. Inlet temperature: ≦ 45 ℃
                      Common parameters:
                      1. The finished product angry dew point: - 40 ℃ ~ 70 ℃
2. Switching cycle: 10 min is adjustable
3. The regeneration gas (15 ~ 18) % capacity
4. Control modes: single chip microcomputer automatic control program
5. The pressure loss: ≦ 0.02 Mpa
6. Power supply: AC 220 v, 50 hz
7. Adsorbent: activated alumina (Al2O3) or molecular sieve (13 x)

               

Modle FAD(m3/min)Adsorbent filling amount ConnectionDimensions(mm) Weight
(kg)
length height width
CMNL-001X1.625G1″9504601390105
CMNL-002X2.546G1″10005101390144
CMNL-003X3.870G1″10005101590250
CMNL-006X6.8136G1 1/2″11006701720454
CMNL-008X8.5194G1 1/2″11007001820540
CMNL-010X10.5200RC2″12007001820600
CMNL-012X14.5240RC2″12007001920660
CMNL-015X17.5350DN6514008202000800
CMNL-020X23480DN65140082022801050
CMNL-025X27560DN80150087023801370
CMNL-030X32670DN80160092023801550
CMNL-040X42880DN1001800102025001850
CMNL-050X551150DN1002000116029002550
CMNL-060X651350DN1252450122029503000
CMNL-080X851800DN1252650136029503800
CMNL-100X1102300DN1252900150030504200
CMNL-120X1302760DN1503200180030505100
CMNL-150X1703100DN2003500190031007200
 


Hot Tags: no heat regenerative adsorption drying machine, China, suppliers, manufacturers, factory, wholesale, buy, made in China
  • Feedback