Agricultural PTO Shaft for Round Balers John Deere Standard 447, 449, 457, 458 Silage Special, 459, 467, 468, 469, 547, 557, 558, 559, 567, 568, 569

التصنيف: الوسم:

The John Deere baler is a machine used to bundle hay into haystack rolls. The PTO (Power Take off) shaft is an important component in the baler, which transmits the power of the engine to the baler, thereby achieving the movement of the baler.

PTO Shaft for Round Balers

The John Deere baler is a machine used to bundle hay into haystack rolls. The PTO (Power Take off) shaft is an important component in the baler, which transmits the power of the engine to the baler, thereby achieving the movement of the baler.
The working principle of the PTO shaft is as follows:

Agricultural PTO Shaft for Round Balers John Deere Standard 447, 449, 457, 458  Silage Special, 459, 467, 468, 469, 547, 557, 558, 559, 567, 568, 569

 

  1. When the engine is running, power is transmitted to the PTO shaft through the shaft.
  2. There is a gearbox on the PTO shaft, and the gears in the gearbox will mesh with the gears on the PTO shaft.
  3. Through the transmission of the gearbox, the PTO shaft can output a large amount of power, ensuring the movement of the baler.
  4. The PTO shaft can also be connected to the brake system to control the movement of the baler.

In the John Deere baler, the PTO shaft is usually adjusted at different speeds through a converter. The converter can convert high-speed power into low-speed power, allowing the baler to operate stably under different working conditions.
In summary, the PTO shaft is a crucial component in the John Deere baler, which transmits the power of the engine to the baler, thereby achieving the movement of the baler.

Recommended PTO Shaft

John Deere Round Balers Models: 447, 449, 457, 458 Standard, 458, 458 Silage Special, 459, 467, 468, 469, 547, 557, 558, 559, 567, 568, 569

John Deere calls for CAT4 and CAT5 constant velocity drivelines depending on model, with friction clutch. Original Equipment PTO Shaft will Vary
Input shafts are 1.375-6 or 1.375-21.

  •  CAT 3, 4, 5 PTO Shaft Constant Velocity

    Available for tractors using 1.375"-6 or 1.375"-21 spline.
    Input shaft is usually 1.375-6.
    Other combinations are available.
    If you have a 1.75" x 20 spline tractor output we can modify a PTO CV head for you.
    Model PTO / RPM Protection
    448 CAT4/540 FRICTION CLUTCH
    458 CAT3/540 SHEARBOLT
    458 CAT4/540 FRICTION CLUTCH
    558 CAT4/540 FRICTION CLUTCH
    468 CAT4/540 FRICTION CLUTCH
    468 CAT5/1000 FRICTION CLUTCH
    568 CAT4/540 FRICTION CLUTCH
    568 CAT5/1000 FRICTION CLUTCH
  • OEM Weasler Half Shaft ReplacementsAgricultural PTO Shaft for John Deere Round Balers 469, 569Agricultural PTO Shaft for John Deere Round Balers 469, 569

    Category Tractor splines Telescoping splines
    4 1.375*6 1.375-20
    4 1.375*6 1.375-20
    5 1.375*6 1.750-20
    5 1.375*21 1.750-20

 

What Are the Conditions for the PTO Shaft Suitable for Hay Balers

The PTO shaft suitable for hay balers requires the following requirements:

  • Capable of withstanding high-strength transmission: The PTO shaft needs to transmit engine power to the baler, so it needs to withstand high-strength transmission. The strength and stiffness of the PTO shaft are required to meet the transmission requirements to ensure the stable operation of the baler.
  • Quick response: Hay balers usually need to complete packaging work in a short period of time, so the PTO shaft needs to have power transmission capability that can respond quickly.
  • Ability to adjust speed: In the operation of a hay baler, different speeds are required under different working conditions. Therefore, the PTO shaft needs to have the ability to adjust speed to adapt to different working conditions.
  • Easy maintenance and upkeep: The working conditions of the hay baler are harsh and require frequent maintenance and upkeep. Therefore, the PTO shaft should be easy to disassemble and maintain in order to promptly repair damaged components and ensure the normal operation of the baler.
  • Safety: During the operation of the hay baler, the PTO shaft needs to ensure safety. The design and manufacturing of the PTO shaft are required to comply with relevant safety standards to ensure the safety of operators.

In summary, the PTO shaft suitable for hay balers needs to have high strength, fast response, ability to adjust speed, ease of maintenance and upkeep, and high safety.

 

We not only provide pto shafts, but also provide related pto accessories, as well as gearboxes for use with pto shafts. We can provide you with solutions for all the agricultural machinery accessories you need to protect your agricultural machinery

Agricultural Gearboxes

Accessories of PTO Shaft

arالعربية