Logo XINLAN Usine de fabrication d'engrenages en Chine

Arbre de prise de force de souffleuse à neige pour souffleuses Woods

Catégorie : Étiquettes : ,

Snowblower typically uses PTO shaft to drive the drum to rotate, thereby achieving the function of clearing snow.
When the PTO shaft starts rotating, it transmits power to the drum, which drives the drum to rotate. The rotation of the roller will push the snow towards the side of the machine in order to remove the snow. At the same time, Snowblower can also control the rotation speed and direction of the roller through the control handle to better clean up snow.
In Snowblower, the PTO shaft typically transmits power through a turbine and gearbox. The turbine converts the mechanical energy output from the engine into rotational energy, and the gearbox connects the output of the turbine to the drum. In this way, PTO shaft ensures that Snowblower can efficiently clean up snow and control the rotation speed and direction of the drum when needed.

Snow Blower

Snowblower is a machine used to clean snow, usually used outdoors in winter. It typically consists of an engine and a rotating drum that pushes snow to one side to remove it from a driveway, street, or other road surface. Snowblower is commonly used to clean the road surface in heavy snow situations, such as after heavy snow or when roads are blocked. It can clear a large amount of snow in a short time, making it easier for people to pass.Arbre de prise de force de souffleuse à neige pour souffleuses Woods

PTO Shaft for Snowblower

Snowblower typically uses PTO shaft to drive the drum to rotate, thereby achieving the function of clearing snow.
When the PTO shaft starts rotating, it transmits power to the drum, which drives the drum to rotate. The rotation of the roller will push the snow towards the side of the machine in order to remove the snow. At the same time, Snowblower can also control the rotation speed and direction of the roller through the control handle to better clean up snow.
In Snowblower, the PTO shaft typically transmits power through a turbine and gearbox. The turbine converts the mechanical energy output from the engine into rotational energy, and the gearbox connects the output of the turbine to the drum. In this way, PTO shaft ensures that Snowblower can efficiently clean up snow and control the rotation speed and direction of the drum when needed.

Arbre de prise de force de souffleuse à neige pour souffleuses Woods

Série Description Bore Torque
CAT 3 2300 Base Assembly- no rear yoke, universal joint 1.375-6
CAT 3 BYP4 Complete, Quick disconnects 1.375-6 1700mm
CAT 4 2400 Base Assembly- no rear yoke, universal joint 1.375-6 2500mm
CAT 4 BYP6 Base Assembly- no rear yoke 1.375-6 2700mm
CAT 5 2500 Base Assembly- no rear yoke, universal joint 1.375-20 2920mm

 

Composition of Woods Snow Blower

Arbre de prise de force de souffleuse à neige pour souffleuses Woods

1 - AUGER WELDMENT

2 - SHEAR SPKT 5040X1.25X.3125

3 - FAN WELDMENT, SNOWBLOWER

4 - Housing Weldment

5 - WSHR, 1/2 X 1 X 1/4 FLT Z

6 - Key, 1/4 x 1/4 x 1

7 - chain, 50-1 X 94 INCL. CONN

8 - chainCASE SHIELD (NARROW)

9 - BOLT, HEX 1/2 NC X 1 GR5 ZP FU

10 - BEARING, INSERT 1-1/4

11 - 3 HOLE FLANGE 62MM-3B

12 - 13T 50-1 IDLER 1/2 B BRG.

13 - 1/2 NC x 2 Carriage Bolt

14 - Key, 1/4 x 1/4 x 2-1/2

15 - 3/8 NC x 1 Carriage Bolt

16 - 3/8 inch Round Eye Swivel Spring Snap

17 - BOLT CRG 3/8 NC

18 - GEARBOX 1:1 3-WAY SM SNWBLWR

19 - JACKSHAFT WELD

20 - DRIVE SPROCKET

21 - 1/8 inch Quick Link

22 - chain, PTO Hook Up

23 - 1/4 NC x 1 Carriage Bolt

24 - SHAFT SHIELD 1-3/4 X 16-3/8

25 - Muffler Clamp

26 - BOLT HH 3/8 NC X 3/4 GR5 ZP

27 - SKID /MR

28 - HHCS 5/16 NC X 3/4 FLANGE

29 - Lower 3 Pt. Weldment

30 - Upper 3 Pt. Weldment

31 - 1/2 NC x 5 Hex Bolt

32 - 1/2 NC x 3 Hex Bolt

33 - PIN, KLIK 7/16

34 - SHIELD, GEARBOX

35 - Key, 1/4 x 1/4 x 1-1/2

36 - 5/16 NC x 5/16 Socket Set Screw

37 - 5/16 x 1-3/4 Roll Pin

38 - PTO SHAFT, 1-3/8, 6SPL 540

39 - Shear Bolt, 5/16 NC x 1 #1110223

40 - NUT, LOCK 5/16 NC

  • Gearbox: Gearbox is an important component of Woods Snow Blower. It is usually a metal box used to transmit the power of the engine to the rear output shaft. Gearboxes typically have three or four gears to accommodate different speed and load requirements.

    Gearbox for Snow Blower

  • Arbre de prise de force de souffleuse à neige pour souffleuses Woods
  • Output shaft: The output shaft is another important component of the Woods Snow Blower. It is usually connected to the output shaft of the gearbox and transmits power to the rear PTO (Power Take off) shaft through a long transmission shaft.
  • PTO shaft: PTO shaft is another important component of Woods Snow Blower. It is typically connected to the engine output shaft and transmits power through a transmission shaft to subsequent cleaning equipment such as brushes, blades, or rotary sieves.
  • Cleaning equipment: The cleaning equipment of Woods Snow Blower typically includes brushes, blades, or rotary sieves for cleaning snow. These devices are typically located at the rear of the machine and connected to the PTO shaft via a long transmission shaft.
Together, these components form the Woods Snow Blower, enabling it to easily clear large areas of snow.

Nous ne fournissons pas seulement des transmissions à cardan, mais aussi des accessoires de transmission à cardan, ainsi que des boîtes de vitesses à utiliser avec les transmissions à cardan. Nous pouvons vous fournir des solutions pour tous les accessoires de machines agricoles dont vous avez besoin pour protéger vos machines agricoles.

Boîtes de vitesses agricoles

Accessoires de l'arbre à cardans

fr_FRFrançais