Contact Us
Fax:+86-571-88220227
Mail:[email protected]
Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China
Digger Drive Gearbox
Driver Heads – Digger Drives, Output Torque, 4,300 to 20,000 ft.-lb., Two-Speed, Shift-On-The-Fly or Optional Single Speed, Heavy-Duty, Automatic Kick-Down, Maximum System Pressure: 2,750 PSI. The 75 Series Digger Drive, “Hydrasync” uses a high-efficiency double planetary for high-torque...
Driver Heads – Digger Drives, Output Torque, 4,300 to 20,000 ft.-lb., Two-Speed, Shift-On-The-Fly or Optional Single Speed, Heavy-Duty, Automatic Kick-Down, Maximum System Pressure: 2,750 PSI.
The 75 Series Digger Drive, “Hydrasync” uses a high-efficiency double planetary for high-torque requirements, like foundation anchor installation, and drilling larger holes for piers. The 75 can provide a cost-saving alternative to other single-purpose equipment.
The 75 Series is available with automatic “Kick-down” option (when operations require it). The digger will shift to low-speed, high-torque position while you keep digging. There is no need for an additional hydraulic line to shift the motor. This option requires a motor with a high-pressure shaft seal.
Features:
Two-Speed
Automatic kick-down
Heavy-duty
Double planetary
High-efficiency
Models 75 or 78 XLT with Kickdown Features:
2-speed shift-on-the-fly XLT
For use in utility and construction applications
At 2,300 psi, shifts to low-speed high-torque
No shift line, shift valve or motor case drain line
Digger stays in low unless digger control valve is centered
Gives more control for driving anchors in changing soil conditions
Rated Output Torque | 20,000 ft. lbs. | 27,112 Nm |
Maximum System Pressure | 2,750 psi | 189,7 bar |
Output Shaft (hex) | 2-5/8" (66,7 mm) | 3" (76,2 mm) |
Shaft Pullout Load | 30,000 lbs. | 13,600 kg. |
Shaft Pressure Load | 30,000 lbs. | 13,600 kg. |
Bail Boss Diameter | 1.51" (38 mm) | 2.0" (50.4 mm) |
Approximate Weight (with motor) | 510 lbs. | 230 kg. |
Motor Mount | SAE "C" | 2-bolt & 4-bolt |
Motors | 1 & 2-speed (speed gear type) | - |
Maximum Shifting Pressure | 300 psi (20,7 bar) | - |
Motor Case Crain | Required | |
Oil Capacity | 10 pts. | 4,6 liters |
Weight (with motor) | 510 lbs. | 231,8 kg. |
- | - | |
75/78 with Kick-down Digger Drive (product specification) Criteria | - | - |
Hydraulic System | - | |
2400 psi / 250 psi | - | |
40 gpm minimum | - | |
Motors | Two-speed with high-pressure seal | |
Motor mount | SAE "C" 2-bolt & 4-bolt | |
Heavy-Duty, high-efficiency, double planetary drive | Shaft side loading not recommended |