Tubo di limone per l'albero di trasmissione della presa di forza parti della trasmissione agricola
The North American power take-off transmission system is usually one of four shapes: square, circular, rectangular, or spline.
On the other hand, transmission systems with shapes like lemons, stars, or three blades may be metric. Specifically, lemon and star shaped contours typically belong to the German series PTO shaft. The trilobal outline indicates that it is an Italian series axis.
Dimensions of Lemon Tube
Serie | Kit croce | Outer tube | Inner tube | |||||||
A | B | A | B | C | E | F | G | |||
1 | φ22 | 54 | 1.03L | 39 | 30 | 2.9 | 1.04L | 30.8 | 23.7 | 3.5 |
2 | 23.8 | 61.3 | 2.03L | 48 | 41.2 | 2.9 | 2.04L | 40.1 | 34.5 | 4 |
3 | 27 | 70 | 3.03L | 48 | 41.2 | 2.9 | 3.04L | 40.1 | 34.5 | 4 |
4 | 27 | 74.6 | 4.03L | 48 | 41.2 | 2.9 | 4.04L | 40.1 | 34.5 | 4 |
5 | 30.2 | 80 | 5.03L | 57.5 | 48 | 3.8 | 5.04L | 49 | 39.5 | 4.5 |
6 | 30.2 | 92 | 6.03L | 57.5 | 48 | 3.8 | 6.04L | 49 | 39.5 | 4.5 |
32 | 32 | 76 | 32.03L | 57.5 | 48 | 3.8 | 32.04L | 49 | 39.5 | 4.5 |
Composition of PTO Shaft
① Cross kit | ② Roll Pin | ③ Female Tube End Yoke | ④ Inner Tube | ⑤ Slip Cluth Assembly |
⑥ Male tube end yoke | ⑦ Outer tube | ⑧ Tractor End Yoke | ⑨ Quick Disconnect Pin | ⑩ Safety shield |
What are the Different Types of PTO tubes?
The North American power take-off transmission system is usually one of four shapes: square, circular, rectangular, or spline.
On the other hand, transmission systems with shapes like lemons, stars, or three blades may be metric. Specifically, lemon and star shaped contours typically belong to the German series PTO shaft. The trilobal outline indicates that it is an Italian series axis.
Get a PTO Shaft That Works With Your Tractor
When purchasing PTO shafts, you need to consider several factors. After purchasing, you may find that some adjustments are needed to make the shaft size suitable for your tractor.
For example, you may need to cut the powertrain system to an appropriate length for overlapping operations. If you lift your tool to open the shaft, you may eventually damage your equipment. There should be at least one-third overlap between the shaft and the tube. For the sliding sleeve, there will be approximately 3 inches of overlap.
If you need to shorten the shaft, please refer to our tips on cutting the shaft to the appropriate size. We hope that by providing online resources and accessing our team's experienced knowledge over the phone, you can easily complete this process and have confidence in the parts you purchase.
PaulB Parts can help you find the PTO powertrain system you need! Browse online for the power output shaft transmission system we have selected and find all the parts you need.
Non ci limitiamo a fornire alberi cardanici, ma forniamo anche i relativi accessori per la presa di forza e i riduttori da utilizzare con gli alberi cardanici. Siamo in grado di fornirvi soluzioni per tutti gli accessori per macchine agricole di cui avete bisogno per proteggere le vostre macchine agricole.