ウォルターシャイド W 2500 PTO シャフト交換農業トラクター PTO ドライブライン
当社のPTOシャフトは、ドイツWalterscheid社の類似品と交換可能で、ドイツWalterscheid社に匹敵する高品質の製品を提供することができます。
当社のPTOシャフト製品は、優れた性能と耐久性を確保するために、高品質の材料と高度な製造プロセスを使用しています。当社の製品は、絶妙なデザインと外観を持ち、効率、精度、安定性の特性も持っています。当社の製品は、厳格な試験と検証を受けており、最高の品質と性能基準を満たしています。
W 2500 PTO Shaft Sizes
注文番号 | 長さ(mm) | ガード | チューブ | A | B | ||
ヨーク | 内径 | ヨーク | 内径 | ||||
1113111 | 560 | SD25 | S4/S5 |
じゅんへんせいほう | 1 3/8インチ x 6スプライン | AG | 1 3/8インチ x 6スプライン |
1113112 | 710 | SD25 | 1 3/8インチ x 6スプライン | 1 3/8インチ x 6スプライン | |||
1113113 | 860 | SD25 | 1 3/8インチ x 6スプライン | 1 3/8インチ x 6スプライン | |||
1113114 | 1010 | SD25 | 1 3/8インチ x 6スプライン | 1 3/8インチ x 6スプライン | |||
1113115 | 1210 | SD25Z | 1 3/8インチ x 6スプライン | 1 3/8インチ x 6スプライン |
W 2400 シリーズ PTO 部品
トラクター・ヨーク |
||||||
セーフティ・スライド・ロック リペアキット - *19-15094 |
クイックディスコネクト 補修キット - *13007138 |
ボールシャー リペアキット |
||||
薄暗い"A" | ディム"B" | ディムA "ボア | ディム"B" | ディムA "ボア | ディム"B" | シアーボルト |
1 3/8インチ x 6スプリ | 5.43” | 1 3/8" x 6 Spl. | 4.76” | 1 3/8インチ x 6スプリ | 5.85” | 3/8インチ - 16 グレード 5 |
1 3/4" x 20 Spl. | 5.55” | 1 3/4" x 20 Spl. | 4.76” | 1 3/4"×20スプリ | 6.37” | 3/8インチ - 16 グレード 5 |
1 3/8" x 21 Spl. | 5.43” | 1 3/8" x 21 Spl. | 4.76” | 1 3/8インチ x 21スプリ | 5.85” | 3/8インチ - 16 グレード 5 |
クロス&ベアリングキット |
|||
(Rキット) (推奨8時間グリス間隔) |
延長潤滑(Eキット) (推奨50時間グリス間隔) |
||
薄暗い"A" | ディム"B" | 薄暗い"A" | ディム"B" |
1.42” | 3.50” | 1.42” | 3.50” |
インナー・プロフィール・ヨーク | アウター・プロファイル・ヨーク | ||
薄暗い"A" | ディム"B" | 薄暗い"A" | ディム"B" |
2.02” | 4.17" | 2.40" | 4.37” |
インナーチューブ | アウター・チューブ | ||
長さ m | 長さ | 長さ m | 長さ |
1.5 | 59.06" | 1.5 | 59.06" |
1.0 | 39.37" | 1.0 | 39.37" |
ヨークを装着する | ||||||
ディムA "ボア | ディム"B" | 標準キー溝 | ディムA "ボア | ディム"B" | ||
ラウンドボア
キー溝と止めねじ付き |
1.38" | 4.65” | 0.31” | Spline Bore
ピンホール付き |
1 3/8" x 21 Spl. | 4.33” |
1.50" | 4.65” | 0.38” | クランプヨーク | 1 3/8" x 6 Spl. | 4.76” | |
1.75” | 4.65” | 0.38” | 1 3/4" x 6 Spl. | 4.76” | ||
1.38" | 4.65” | 0.39” | 1 3/4" x 20 Spl. | 4.76” | ||
シャーピン
ピンホール付き |
1.38" | 4.63” | 0.50” | 1 3/8" x 21 Spl. | 4.76” | |
1.50" | 4.63” | 0.50” | 4.76” |
簡単ロック交換キット | Guard chain Kit
|
||
ガード 必要に応じてベアリングを注文 |
ドライブライン全長に適合 | ベアリングキット2/キット) | |
48" | 961-3525 | ||
60" | 961-3525 |
ドライブライン | |||
総合力。 長さ寸法"A" |
マックス・ランニング 長さ | Tラクターヨーク | 実施 ヨーク |
36" | 47" | 1 3/8" x 6 Spl.QD | 1 3/8" x 6 Spl.QD |
40" | 51" | 1 3/8" x 6 Spl.QD | 1 3/8" x 6 Spl.QD |
55" | 73" | 1 3/4” x 20 Spl. QD | 1 3/8” x 21 Spl. w/Pinhole |
57" | 76" | 1 3/8" x 6 Spl.QD | 1 3/8" x 6 Spl.QD |
PTO Shaft installation
When lifting the screw conveyor for the first time or connecting to different tractors, ensure that the PTO shaft does not compress and touch the bottom. The measurement between the tractor drawbar and the tractor PTO powertrain is very important. If the distance between the tractor PTO output shaft and the input coupling on the auger is too short, the PTO power train will bottom out when the auger is in the raised position. This will cause damage to the PTO power train, bearings, or dust boot housing. Please read the manual carefully. The most important thing is to pay attention to the PTO shaft when setting up the spiral conveyor for the first time.
When moving the auger, disconnect the PTO shaft from the tractor. Failure to disconnect from the tractor can damage the PTO shaft or input shaft on the auger.
Read the user manual. Before doing anything, please ensure that you have fully read and understood this manual.
How do I Know What size PTO Shaft I Need?
To determine the required size of the PTO shaft, the following factors need to be considered:
- Vehicle specifications: Different vehicles require different sizes of PTO shafts. For example, large vehicles require a larger PTO shaft to drive a larger generator or water pump.
- The purpose of the PTO shaft: Different PTO shafts also have different purposes. For example, if a vehicle needs to drive a generator, a larger PTO shaft is required to withstand a greater load.
- The load capacity of the PTO shaft: The load capacity of the PTO shaft also needs to be considered. If the device that needs to be driven has a large load capacity, a larger PTO shaft is required.
- Installation position and space: The installation position and space of the PTO shaft also need to be considered. If the installation location and space are small, a smaller PTO shaft is required.
- Based on the above factors, you can choose the appropriate PTO shaft size. Generally speaking, you can consult with vehicle manufacturers or professional car repair shops, who can provide you with more accurate advice.
私たちは、PTOシャフトだけでなく、関連するPTOアクセサリやPTOシャフトで使用するギアボックスも提供しています。農業機械を保護するために必要なすべての農業機械アクセサリーのソリューションを提供することができます。