2 Series PTO Drive Shaft Interchanges with Bondioli & Pavesi Driveline PTO Parts
We are partners of Bondioli&Pavesi and can manufacture Pto shafts similar to theirs. Our production line adopts the most advanced technology and equipment to ensure that the Pto shafts we produce have high-quality quality and performance. Our team consists of a group of experienced and skilled craftsmen who treat every detail with extremely high standards.
2 Series PTO Parts
트랙터 요크 | |||
안전 슬라이드 잠금 장치 수리 키트 - *19-15094 |
빠른 연결 해제 수리 키트 - *13007138 |
||
어둡다. "A" | 어둡다. "B" | 어둡다. "A" 보어 | 어둡다. "B" |
1 3/8" x 6 Spl | 4.17" | 1 1/8” x 6 Spl. | 3.70” |
1 3/8" x 21 Spl. | 4.17" | 1 3/8" x 6 Spl. | 3.86” |
1 3/8" x 21 Spl | 3.86” | ||
크로스 & 베어링 키트 |
|||
(R-Kit) (8시간 그리스 주기 권장) | 확장 윤활(E-Kit)(50시간 그리스 주기 권장) |
||
어둡다. "A" | 어둡다. "B" | 어둡다. "A" | 어둡다. "B" |
.94” | 2.41” | .94” | 2.41” |
내부 프로필 요크 | 외부 프로필 요크 | ||
어둡다. "A" | 어둡다. "B" | 어둡다. "A" | 어둡다. "B" |
1.17” | 2.95” | 1.45” | 2.95” |
내부 튜브 | 외부 튜브 | ||
길이 m | 길이(단위) | 길이 m | 길이(단위) |
1.5 | 59.06" | 1.5 | 59.06" |
1.0 | 39.37" | 1.0 | 39.37" |
Roll Pin
|
전단 핀 |
||
어둡다. "A" | 어둡다. "B" | Pinhole | |
1.25” | 3.15” | 0.25" | |
1.38" | 3.62” | 0.25" | |
이지 잠금 교체 키트 | 멍에 구현 |
||
어둡다. "A" | 어둡다. "B" | 표준 키홈 | |
1.0” | 3.07” | 0.25" | |
1.25” | 3.07” | 0.25" | |
1.18” | 3.07” | 0.39" | |
Guard chain Kit |
Guard
|
||
전체 구동계 길이에 적합 | 베어링 키트 (키트당 2개) | ||
48" | 961-2502 | ||
60" | 961-2502 | ||
드라이브라인 | |||
전체 보상. 길이 어둡게. "A" |
최대 달리기 길이 | T트랙터 요크 | 구현 멍에 |
47" | 70” | 1 3/8" x 6 Spl. QD | 1 3/8" x 6 Spl. QD |
51" | 76” | 1 3/8" x 6 Spl. QD | 1 3/8” Rd w/Pinhole |
52" | 79” | 1 3/8" x 6 Spl. QD | 1 1/4” Rd w/Pinhole |
48" | 70” | 1 3/8" x 6 Spl. QD | |
60" | 89” | 1 3/8" x 6 Spl. QD | |
33" | 58” | 1 3/8" x 6 Spl. QD | 1 3/8” x 6 w/Friction Clutch |
52" | 77" | 1 3/8" x 6 Spl. QD | 1 3/8” x 6 w/Radial Clutch |
31" | 41” | 1 3/8” x 6 Spl. Safety side lock | 1” Rd w/1/4” Key ball shear |
Safety and Working Conditions of PTO Shaft
Proper use and maintenance of the transmission system and protective devices are crucial for operator safety. When safety protection devices are missing or unable to function properly, the incidence of transmission accidents is high. We recommend using protective devices and protective devices for transmission tractors and implements. Before using the transmission system, damaged or damaged components must be replaced with properly installed original equipment spare parts. Only use the implement with the original transmission system. The implement input connection shield must be compatible with the power train and application program. In order to comply with international safety standards, machine manufacturers should provide safety signs and instructions stating that protective devices must be kept in place and that the machine must not be operated with the protective devices open or removed. These designs should be used to alert people to the potential risks when unlocking, opening, or removing protective devices
- All rotating parts must be protected. Contact with rotating transmission systems may result in death or serious injury. The tractor main cover, transmission cover, and implement input connection cover form an interactive protection system
- Before operation, ensure that all power transmission systems, tractors, and implement sites are working properly and in place. Before using the powertrain system, damaged or missing parts must be replaced with the correct installation of the final equipment spare parts.
- Before approaching the PTO or performing maintenance work, detach the PTO, turn off the tractor engine, remove the key, and check if all rotating components have stopped.
- Do not approach or allow bystanders to approach the work area or rotating parts. Do not wear loose clothing, jewelry, hair, or anything that may be trapped by the machine. Contact with rotating parts may cause serious injury or death.Do not stand, tilt, or otherwise come into contact with the transmission system. Do not step over or plane over the transmission system
PTO Shaft Repair
The following introduces some common faults and solutions of the PTO shaft
Agricultural PTO (Power Take Off) shaft refers to the shaft that outputs power from the tractor engine, usually used to drive agricultural machinery such as harvesters, lawn mowers, and tractors. The common faults of PTO shaft include wear, looseness, jamming, etc. The following are some common faults and solutions:
- Wear: The PTO shaft may experience wear during use, resulting in a decrease in its diameter and affecting power output. The solution is to replace the PTO shaft.
- Loosening: During long-term use, the PTO shaft may become loose due to factors such as vibration and impact, resulting in unstable power output. The solution is to tighten the PTO shaft.
- Stuck: The PTO shaft may become stuck during operation due to impurities, dirt, and other reasons, resulting in power output interruption. The solution is to clean the PTO shaft and check its wear. If necessary, replace the PTO shaft.
- Damaged PTO shaft support bearing: The PTO shaft support bearing is a key component to ensure stable operation of the PTO shaft. If the bearing is damaged, it may cause poor operation of the PTO shaft. The solution is to replace the PTO shaft support bearing.
- Damaged PTO shaft connector: The PTO shaft connector is a key component connecting the tractor engine and agricultural machinery equipment. If the connector is damaged, it may cause power output interruption. The solution is to replace the PTO shaft connector.
In summary, the common troubleshooting methods for PTO shafts mainly include replacing, tightening, cleaning, and replacing key components. When using agricultural machinery and equipment, regular maintenance and inspection of the PTO shaft can effectively reduce the occurrence of faults.
당사는 동력전달축뿐만 아니라 관련 동력전달축 액세서리와 동력전달축과 함께 사용하기 위한 기어박스도 제공합니다. 농기계를 보호하는 데 필요한 모든 농기계 액세서리에 대한 솔루션을 제공할 수 있습니다.