크레인용 붐 안티 틸트 유압 실린더

Boom Anti Tilt Hydraulic Cylinder

The Boom Anti Tilt Hydraulic Cylinder is an important component installed on a crane, mainly used to control the tilt and stability of the boom. Its function is to prevent the boom from tilting due to uneven or unstable loads during operation, provide support and balancing force, and ensure the safe operation of the crane.

Working principle

The Boom Anti Tilt Hydraulic Cylinder uses a hydraulic system to achieve its functionality. It usually consists of a hydraulic cylinder and related control valves. When the arm of the crane tilts, the hydraulic system will sense this tilt and adjust the hydraulic oil inlet and outlet of the hydraulic cylinder through the control valve to generate corresponding force to counteract the tilt force. When hydraulic oil enters the hydraulic cylinder, the cylinder will expand and generate a reverse force, causing the boom to return to its equilibrium position.

Installation location

The Boom Anti Tilt Hydraulic Cylinder is usually installed between the arm and frame of the crane. The specific location may vary depending on the design and model of the crane, but in general, it is installed near the connection point between the boom and the frame to provide effective support and control the tilt of the boom.
By controlling the Boom Anti Tilt Hydraulic Cylinder, crane operators can maintain the balance and stability of the boom during lifting operations. This is very important for safe operation, improving work efficiency, and preventing accidental tilting of the crane.

Parameter of Boom Anti Tilt Hydraulic Cylinder

How does the Crane Operator Control the Boom Anti Tilt Hydraulic Cylinder to Maintain Balance and Stability?

The crane operator can control the Boom Anti Tilt Hydraulic Cylinder by controlling the hydraulic system of the crane to maintain the balance and stability of the boom. The specific control methods may vary depending on the design and control system of the crane, but typically include the following methods:

1. Joystick/Handle: Crane operators can use the joystick or handle on the control console to control the hydraulic system. By moving the joystick, the operator can adjust the control valve in the hydraulic system to control the flow and pressure of hydraulic oil, achieving the expansion and balance of the Boom Anti Tilt Hydraulic Cylinder.
2. Control panel: Some cranes may be equipped with a dedicated control panel, which allows the operator to control the hydraulic system through buttons, switches, or knobs on the panel. These control panels typically provide different operating modes and parameter setting options to adapt to different work requirements and boom balance requirements.
3. Remote control: Some modern cranes are also equipped with wireless remote controls, which allow operators to remotely control the hydraulic system of the crane through buttons and controllers on the remote control. This approach can provide greater flexibility and convenience, allowing operators to control from a safe distance.

Regardless of the control method used, the crane operator needs to observe the tilt status of the boom according to the actual situation, and gradually adjust the extension and strength of the Boom Anti Tilt Hydraulic Cylinder to maintain balance and stability of the boom. Operators should also pay close attention to the working environment and load situation of the crane, make timely adjustments, and ensure safe operation and efficient work.

China Top Hydraulic Cylinder Manufacturer

We pride ourselves on having a top-notch independent assembly and research platform, which sets us apart from the competition. In our forklift cylinder production workshop, we have four semi-automatic lifting cylinder assemblies, a production line, and one fully automated tilting cylinder assembly line. With a design annual production capacity of 1 million units, we ensure efficient and high-volume production.

Our dedicated cylinder workshop is equipped with various specifications of semi-automatic cleaning and assembly systems, with a design annual production capacity of 200,000 units. It is furnished with renowned brand CNC machining equipment, machining centers, high-precision cylinder processing specialized equipment, robot welding machines, automatic cleaning machines, automatic cylinder assembly machines, and an automated painting production line. We have over 300 sets of major operating equipment.

The optimization and efficient utilization of our equipment resources guarantee the precision requirements of our products, meeting high standards of quality. We take pride in delivering products that adhere to stringent quality standards.

Click on the link below to visit our factory through online VR
https://v.holoworld.com.cn/v/virtualbuy.html?id=78a76263-47ab-485f-b978-0dafacfb4096