Contact Us

Fax:+86-571-88220227

Mail:[email protected]

Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China

Home > News > Content
Maintenance Of Machining Equipment Such As Sprocket Oct 12, 2019

1. Before mechanical processing, wipe the mechanical processing equipment, lubricate according to the regulations, and make sure that there are no oil, no air leakage, no oil leakage, and debris, debris and dirt around the machining equipment are cleaned. 2. Wipe the equipment rails, transmission parts and exposed

1. Before mechanical processing, wipe the mechanical processing equipment, lubricate according to the regulations, and make sure that there are no oil, no air leakage, no oil leakage, and debris, debris and dirt around the machining equipment are cleaned.

2. Wipe the equipment rails, transmission parts and exposed parts.

3. Pay attention to the temperature, pressure, liquid level, electrical, hydraulic, pneumatic system, instrument signal, safety and safety of the equipment during processing.

4. Regularly check the technical condition of each component of the equipment, tighten the loose parts, and adjust the matching clearance. Check interlocks and safety devices. The transmission sound is normal, safe and reliable.

5. Regularly clean the oil line, dust felt, oil filter, add oil or change oil in the fuel tank. Check the hydraulic system to achieve oil quality, smooth oil passage, no leakage, no damage.