Contact Us

Fax:+86-571-88220227

Mail:[email protected]

Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China

  • Engine Sprocket

    Engine Sprocket

    ​ with just 18 teeth to reduce the gearing for trials and off road use. To use this you will need to reduce the standard primary chain length from the standard 70 links to 68 links.

  • Cog Sprocket

    Cog Sprocket

    - Precision CNC machined cogs from heat treated Cr-Mo steel - 1/8" "classic" fixed size in Satin Chrome 13 - 20T or ED coated colours Red, Blue, Gold or Purple in 15 - 19T (17T+ are slotted for lighter weight) - 1.37" x 24T standard R/H threaded

  • Gear Sprocket

    Gear Sprocket

    The Vortex Steel Front Sprockets are precision manufactured and induction hardened to precise tolerances. Zinc coated to resist corrosionand drilled lightening holes to reduce rotating mass they are built to last.

  • Chain Cog

    Chain Cog

    Sprocket teeth:32T Chain:415 chain Diameter of Central Hole:36mm Diameter of Fixing Hole(s):7mm Greatest Distance Between Fixing:73mm Shortest Distance Between Fixing:25mm Net Weight:0.162KG ​

  • Duplex Chain Sprocket

    Duplex Chain Sprocket

    Our clients can avail from us, a pristine array of Duplex Chain Sprocket. It is used in engineering and other machinery either to transmit rotary motion between two shafts where gears are unsuitable or to impart linear motion to a track, tape etc.

  • Precision Worm Gear

    Precision Worm Gear

    A gear is a rotating machine part that utilizes cut teeth, or cogs, to mesh with another toothed part—usually another gear or a linear toothed part (called a gear rack)—to transmit rotational motion and torque. By using a combination of precision gears with the correct ratio,...

  • Diy Worm Gear

    Diy Worm Gear

    The wood screw, spurs and cutting edge at the end of the bit would need to be removed as well as the first flight of the auger, which had a shorter pitch. I ground away the bulk of the unwanted material on the bench grinder. The first flight was removed so the remainder of...

  • Globoid Worm Gear

    Globoid Worm Gear

    Compared to the simple cylindrical worm drive, the globoid (or throated) worm design significantly increases the contact area between the worm shaft and the teeth of the gear wheel, and therefore greatly improves load capacity and other performance parameters of the worm...

  • Nema 23 Worm Gear

    Nema 23 Worm Gear

    detail Nema 23 stepper motor with worm gear box 2-phase stepper motor 56mm length 3A 4 lead Suitable for CNC engraving machines, engraving, milling, lathes This worm gear stepper motor has an optional gear ratio of 7.5:1, 10:1, 15:1, 20:1, 30:1 Nema3 worm gear stepper motor...

  • Nema 17 Worm Gear

    Nema 17 Worm Gear

    Turbine Worm Gear Stepper Motor Type Hybrid Bipolar Phase 2 4 wires Step Angle(degrees) 1.8 Model Number 42 Reduction step motor -4 line Holding Torque 500mN.m Current / Phase 1.5A Voltage 12-24v Motor torque 5.5kg.cm Motor size 42mm*42mm*48mm Flange size 42mm*42mm*8mm...

  • Micro Worm Gear

    Micro Worm Gear

    The Micro Gearmotors line is the main product family, where our customers find a reliable partner for the supply of small gearboxes coupled to 12V and 24V electric motors. The range includes DC and brushless motors, combined with worm gearboxes and planetary gearboxes The...

  • Worm Gear And Worm Wheel

    Worm Gear And Worm Wheel

    The arrangement of gears seen above is called a worm and worm wheel. The worm, which in this example is brown in colour, only has one tooth but it is like a screw thread. The worm wheel, coloured yellow, is like a normal gear wheel or spur gear. The worm always drives the...