Agricultural PTO Shaft for Feed Mixer Peecon Vertical 1100 1300 1500

PTO Shaft for Feed Mixer

The PTO (Power Take Off) shaft is an important component in a feed mixer, usually connected to the main engine. The power of the engine is transmitted to the mixing shaft of the mixer through a transmission device, thereby achieving the rotation of the mixer.
The working principle of the PTO shaft is based on the limitations of engine speed and output power, as well as the working needs of the mixer. After the engine starts, its speed and output power will gradually increase until it reaches the required speed and power of the mixer. During this process, the PTO shaft transmits the power of the engine to the mixing shaft of the mixer through a transmission device, driving the mixer for mixing operation.
The PTO shaft usually includes a reducer and a connector, which help reduce engine speed and increase the torque of the mixer to ensure the stability and reliability of the mixing operation. During the mixing process, the rotation of the PTO shaft will drive the mixing shaft of the mixer to rotate, thereby achieving the mixing, stirring, and dispersion of feed.
In short, the PTO shaft is a crucial component in the feed mixer, which transfers the power of the engine to the mixing shaft of the mixer to achieve the rotation of the mixer, thereby achieving the mixing, stirring, and dispersing operations of the feed.

Peecon Feed Mixer Types

MODEL	CAPACITY	# OF AUGERS	MIN. POWER REQUIREMENTS
865	865 CFT	2	95 hp
1100	1100 CFT	2	135 hp
1300	1300 CFT	3	180 hp
1500	1500 CFT	3	200 hp

Our research indicates most tractors using 1.750-20 spline and input shaft on most models is 1.750-6 spline

Other combinations are available.

Eixo de tomada de força recomendado for Feed Mixer

Walterscheid 2580 series PTO Shaft

Parts of PTO Shaft for Feed Mixer

Automatic Cutout Clutches

Modelo	Diameter	Splines	Torque
K64/24	1.750	20	3500nm
K64	1.750	20	2500nm
K64/24	1.375	6	2700nm
K64/24	1.750	6	2700nm
K64/24	1.750	20	2700nm

Shear Bolt Yokes

Modelo	Diameter	No of Splines	C-to-bolt	Bolt	Torque
KB61	1.375	21	56MM	10MM
KB61	1.375	6			2920nm
KB61/2	1.375	6	56 M10		2920nm
KB61/2	1.375	6			2920nm
BTL	1.750	20	56mm	10mm	2920nm
KB61/2	1.750	20	56M12	12	4200nm
KB61	1.750	6		12	2920nm
KB61/2	1.750	6	56 M10		2920nm
KB61/2	1.9375 RD	0.50 KEY	56

Advantages of Our PTO Shaft

• Handling
  Ample space for all PTO drive shaft quick-dis-connect locks when coupling and uncoupling.
  The guard cones of the Power Drive PTO drive shafts can be unlocked and pushed back with ease. This facilitates the coupling and uncoupling of the PTO drive shaft, plus joints and guard bearings can be maintained more easily. The integrated internal cone reinforcement permits the use of particularly flexible cones which provide an even higher degree of safety. Profiled, thick-walled guard tubes prevent rotation of the two guard halves in relation to one another. It is thus no longer necessary to install a safety chain on the tractor side. In the full guard version, the safety chain can be completely eliminated.

• Maintenance
  Ample space and easily accessible Iubricating points during maintenance.