Logotipo da XINLAN Fábrica de engrenagens da China

Eixo de tomada de força agrícola para enfardadeiras de fardos quadrados grandes Krone BIGPack HDP 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

The PTO (Power Take Off) shaft is an important component of a large hay baler. It is usually a shaft drawn from the tractor’s power output shaft, which can output the tractor’s power to the baler’s drive system.

In large hay balers, the PTO shaft is typically used to drive key components such as the baler, cutter, and comber. Specifically, when the tractor drives the PTO shaft, it drives the gearbox in the baler, causing the gears in the gearbox to rotate, thereby driving various components in the baler to work.

Large Square Baler

Large hay balers are typically used for large-scale hay production in agriculture and animal husbandry. Hay is the dry feed of grass or other plants on grasslands or pastures, usually used for feed and mattresses. Due to the fact that hay is an important component of agriculture and animal husbandry, efficient machines are needed to produce and bundle hay.Eixo de tomada de força agrícola para enfardadeiras de fardos quadrados grandes Krone BIGPack HDP 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

The PTO (Power Take Off) shaft is an important component of a large hay baler. It is usually a shaft drawn from the tractor's power output shaft, which can output the tractor's power to the baler's drive system.

In large hay balers, the PTO shaft is typically used to drive key components such as the baler, cutter, and comber. Specifically, when the tractor drives the PTO shaft, it drives the gearbox in the baler, causing the gears in the gearbox to rotate, thereby driving various components in the baler to work.

The function of the PTO shaft is very important because it can output the tractor's power to the baler, thereby achieving control and drive of the baler. If there is no PTO shaft, the tractor can only control the baler through manual operation, which will require more manpower and time to operate, thereby improving cost and efficiency.
In summary, the PTO shaft is an indispensable part of a large hay baler, which achieves efficient control and drive of the baler by outputting tractor power to the baler.

Eixo de tomada de força recomendado

Smaller Krone Square Balers

  • CAT 7/8 SFT SH series PTO Shaft

This Constant Velocity PTO will operate efficiently at 200 Horse Power and beyond @ 1000 RPMs.Eixo de tomada de força agrícola para enfardadeiras de fardos quadrados grandes Krone BIGPack HDP 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

For increased performance and life, order the splined version:

Eixo de tomada de força agrícola para enfardadeiras de fardos quadrados grandes Krone BIGPack HDP 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

This Constant Velocity PTO will operate efficiently at 200 Horse Power and beyond @ 1000 RPMs

Eixo de tomada de força agrícola para enfardadeiras de fardos quadrados grandes Krone BIGPack HDP 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

Krone auxiliary PTOs

Eixo de tomada de força agrícola para enfardadeiras de fardos quadrados grandes Krone BIGPack HDP 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

How to install PTO Shaft on the Baler?

Step 1- Remove the lawn mower, remove the old PTO shaft, and install the new adapter onto the lawn mower gearbox. In the manual, they mentioned that this would be a tight fit. Oh my goodness, they're right. Just knock a few times with a rubber or mallet.

Reminder # 1: When I first installed the fixing screw and attempted to install the deck, I noticed that the screw seemed to hit the automatic connection adapter and prevented it from sliding on a smooth surface, then I slid the screw again. So I had to remove the mmm agian and decided to file off the screws.

Step 2- Lower the millimeter lift arm to the installation position.
Automotive components, automotive tires, automotive brake wheels

Eixo de tomada de força agrícola para enfardadeiras de fardos quadrados grandes Krone BIGPack HDP 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

Step 3- Loosely install the bracket onto the crossbar. The bolt closest to the crossbar was installed tightly, but it was not tightened. The bolt in the middle hole is installed just enough to secure it in place.

Step 4- Install automatic connection PTO. First, go to the tractor and make sure it is stuck on the spindle. Then install it into the bracket and loosely install the last two bolts.

Step 5- Tighten 6 bolts to secure the automatic connection to the bracket. There is no real gap in the installation position, but I still find it best to push the automatic connection up into the bracket as much as possible when tightening.

Step 6- It is to use long leveling bolts to level the joint to the ground. However, when you first install the mmm, keep it loose for final adjustment. (Tip 2: Stop the tractor immediately after passing the deck and check the alignment of the connectors before driving. At this point, make any adjustments to the leveling screws.)

Step 7- Drive over and connect to the deck. At this point, the leveling screw should be approximately 1mm away from the baffle on the crossbar. Then you can tighten this bold font. (Tip # 3, I read on the forum here that some homeowners found this bolt on the grass while mowing. So I installed a small threaded lock on the top nut, hoping to prevent this situation.)

Não só fornecemos eixos pto, mas também acessórios pto relacionados, bem como caixas de engrenagens para uso com eixos pto. Podemos fornecer soluções para todos os acessórios de máquinas agrícolas de que você precisa para proteger suas máquinas agrícolas

Caixas de engrenagens agrícolas

Acessórios do eixo da tomada de força

pt_BRPortuguês do Brasil