Contact Us

Fax:+86-571-88220227

Mail:[email protected]

Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China

Sprocket

Sprockets are used in bicycles, motorcycles, cars, tracked vehicles, and other machinery either to transmit rotary motion between two shafts where gears are unsuitable or to impart linear motion to a track, tape etc. Perhaps the most common form of sprocket may be found in the bicycle, in which the pedal shaft carries a large sprocket-wheel, which drives a chain, which, in turn, drives a small sprocket on the axle of the rear wheel. Early automobiles were also largely driven by sprocket and chain mechanism, a practice largely copied from bicycles.
  • Scraper Chain Sprocket

    Scraper Chain Sprocket

    Having experience of more than three decades, we are engaged in offering a wide range of Scraper Chain Sprocket. This sprocket is manufactured as per set international standards using top quality raw materials and pioneering techniques. Offered sprocket is used in conveyor...

  • Cc600 Sprocket

    Cc600 Sprocket

    Sprockets are keywayed in pairs on center line of the tooth gap with bosses facing, deep end of tapered keyway on boss side. Single setscrews are positioned over the key way. Any second setscrew is positioned at 90 degrees to the first.

  • Escalator Ratchet Sprocket

    Escalator Ratchet Sprocket

    We are top 3 major supplier of sprockets for escalator in China. We produced already for Schindler elevator, Hitachi elevator , Thyssen krupp escalator and Toshiba elevator.

  • escalator Friction sprocket

    escalator Friction sprocket

    We are top 3 major supplier of sprockets for escalator in China. We produced already for Schindler elevator, Hitachi elevator , Thyssen krupp escalator and Toshiba elevator.

  • Handrail Drive Sprocket

    Handrail Drive Sprocket

    Style: Sprocket Bolt with guard Material: 6061-T6 aluminum, with 2x holes for sprocket bolts Sizes: 25T or 28T (selectable as an option) Axle Diameter: Fits to 19mm, 22mm and 24mm crank spindles, adapter rings included Thickness: 6mm Teeth: 1/8" Extras: With hole for...

  • Half Chain Sprocket

    Half Chain Sprocket

    High quality aluminum racing gears. #40 Chain Size Fits 5 1/4" standard hub pattern Lightened design Thickness: .250"

  • Weld Conveyor Sprocket

    Weld Conveyor Sprocket

    Double pitch sprockets have rollers of the same diameters and widths as American Standard roller chains of one half the conveyor chain pitch. Engaged by every other tooth, double duty sprockets have two teeth per chain pitch. During each revolution only half the teeth...

  • Free Flow Conveyor Chain Sprocket

    Free Flow Conveyor Chain Sprocket

    Our conveyor chain sprocket is made of medium carbon steel through integral forging process. The integral hardening and tempering ensures optimum strength and toughness. The sprocket teeth are created by specialized gear hobbing machines, and they undergo high frequency...

  • Environmental Chain Sprockets

    Environmental Chain Sprockets

    XLT can provide a full range of sprockets to complement our complete chain offering. Made-to-order sprockets can be supplied to your specifications for non-standard requirements. All sprockets are manufactured to ANSI standards, using the highest quality control procedures.

  • Salt Spreader Sprocket

    Salt Spreader Sprocket

    Besides the sprockets, we also supply chains, bearings, shafting, gearboxes, motors, and UHMW wear panels. To get a quote on salt spreader conveyor chain assemblies or for additional information simply give us a call or email

  • Oil Field Sprockets

    Oil Field Sprockets

    XLT has manufactured oilfield sprockets for most of the equipment builder’s machines in service today. If there is a sprocket drawing that we don’t have we can make a new drawing or reverse engineer your sprocket to manufacture for you. If you have a drawing for the sprocket...

  • STAMPED IDLER SPROCKETS

    STAMPED IDLER SPROCKETS

    Idler sprockets are used in a variety of power transmission applications.XLT manufactures custom two piece idler sprockets combining stamping, machining and bearing capabilities. XLT’s wide variety of options allows customizing in order to respond to the application demands.

First Prev 3 4 5 6 7 8 9 Next Last 6/15
As one of the most professional sprocket manufacturers and suppliers in China, we warmly welcome you to buy or wholesale bulk sprocket made in China here from our factory.